How to flash Micromax X351 with volcano box? the below is the complete way to flash the phone using Volcano box. Micromax X351 has Spreadtrum SC6531 CPU so before you do anything just full backup the flash file and then flash the phone. Read full flash of Micromax X351 then select the flash file and format the phone, if not success then download Micromax X351 flash file and write flash with volcano tool, then format with the same procedure, in this case if the phone is dead due to software issue then it will be solved and you will able to switch on the phone.
Micromax X351 SPD SC6531 CPU Format Success With Volcano Tool |
- Open volcano tool
- Go to SPD tab
- Select SC6531 CPU
- Select Format
- Choose the flash file
- Click on Start
X351 Format Log Volcano tool:
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.15 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.15 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM59), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310001]
FLASH ID: 00EF006000170000
Flash Type: SF_W25Q64DW
Size:0x800000(8MB)
Set to Factory successfully.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:SC6531 [65310001]
FLASH ID: 00EF006000170000
Flash Type: SF_W25Q64DW
Size:0x800000(8MB)
Set to Factory successfully.