How to Use Volcano Tool JIG Cable As USB Cable To Flash MTK 625A/62xx Phones

Here is the tutorial to use volcano tool JIG cable as a USB cable to flash the MediaTek CPU phones which support USB flashing. This topic will help you to flash MTK phones, which support USB flashing i.e. MT625A/62xx using volcano JIG Cable, that means no need to use USB cable to flash this type of phone. If the USB cable damage or not detect the phone then this process will solve these problems. For more details about this please see the below details.
What does it means?
Normally when you flash a phone which has MTK CPU 625A or 62xx, you are using a USB cable for this. When click on Start on Volcano Tool to flash MTK phone you see Analysis of USB port,Please insert phone USB cable then you insert the USB cable to the phone, but some times the phone is not detected with USB cable, in that case you can easily use the Volcano JIG cable as a USB cable to flash this type of phones.
Example:
Here is the example of Micromax X261 which has a MTK 6252 CPU and can be flash using USB cable on Volcano Tool, but here you will know how to flash this phone using Volcano Jig cable by using it USB cable.
How to Use Volcano Tool JIG as USB Cable?
Open volcano tool
Go to MTK tab
Select Read Flash
Choose Boot_11 v5.1232 (625A/62xx)
Select USB mode
Click on Start
See the below Image
Micromax X261 Read Flash Using Volcano JIG Cable

Connect the phone using Volcano Tool JIG cable (i.e. Micromax x261)
After Click on Start
Go to Detect Tab
Select [D+/D-] MTK USB & Mstar Do Find Boot
Click on Detect ( After detecting complete)
Click on Set Pinout
Micromax X261 Set Pinout To Read Flash Volcano Tool

That's all it will read flash of Micromax X261 and you are done. In this way you can use the Volcano box JIG cable as USB cable to flash MTK 625A phones

Follow the above steps carefully to use volcano JIG as a USB Cable to flash MTK 625A/62xx phones.



Post a Comment

Previous Post Next Post

Contact Form